GORE® Automotive Vents for Electronic Power Steering Systems
Steering rack component vents from Gore provide pressure equalization and ingress protection in the harshest environments, to keep steering rack components like boots, torque sensors, belt drives, Electronic Power Packs (EPPs) and motors performing more reliably over time.
Kontakt
United States
+1 800 346 7391
Australia
+61 2 9473 6800
Brazil
+55 11 5502 7800
China
+86 21 5172 8299
France
+33 1 5695 6565
Germany
+49 89 4612 2211
India
+91 22 6768 7000
Italy
+39 045 6209 240
Japan
+81 3 6746 2570
Korea
+82 2 393 3411
Mexico
+52 81 8288 1281
Scandinavia
+46 31 706 7800
Singapore
+65 6733 2882
Spain
+34 93 480 6900
South America
+55 11 5502 7800
Sweden
+46 31 7067800
Taiwan
+886 2 2173 7799
United Kingdom
+44 1506 460123
Infothek
GORE® Automotive Vents for Electronic Power Steering Systems - Snap-Fit Vents: AVS 14, 67, 200
Data Sheets, 384.24 KB
To meet the venting requirements of EPS systems, Gore offers three performance options: the Standard Series (AVS 14), the High Temperature Series (AVS 67) and the Compact Series (AVS 200). All are easy to integrate, and balance responsive pressure equalization with reliable barrier protection.
English (U.S.)
Alle Infos zu GORE® Automotive Vents for Electronic Power Steering Systems
- Technische Informationen (16)
- Datenblätter (5)
- Glossar (2)
- Installationsanleitungen (2)
- White Paper (1)
- Häufig gestellte Fragen (FAQ) (1)
- Fachartikel (1)
- Videos (1)
Overview
In all types of housings, venting is essential for rapid equalization of pressure. Unless relieved, these pressure differentials will repeatedly stress seals. Over the vehicle life, repeated stress cycles will increase the potential for failure. Once a leak path is created, subsequent vacuum cycles can pull liquids or particulates into the housing, where they can degrade sensitive electronics or mechanical components.
Product Specifications
GORE Automotive Vents Snap-Fit Installation offers three PolyVent performance options, to meet varied needs like high temperature stability, small part clearances and different enclosure sizes.
 |
AVS 14: For lower temperature requirements and medium to large housing sizes. |
 |
AVS 67: For high temperature requirements and medium to large housing sizes. |
 |
AVS 200: For lower temperature requirements and small to large housing sizes. |
Contact us to discuss conditions affecting a steering component, and we’ll help identify the Gore venting solution that can enhance performance and reliability for your application over time.
| Product Series | PolyVent Standard Series | PolyVent High Temperature Series | PolyVent Compact Series |
|---|---|---|---|
|
|
|
|
| Product Name (order number for samples) | AVS 14 | AVS 67 | AVS 200 |
| Product Number (order number for series production) | AMF300114 | AMF300067 | AMF300200 |
| Description | Black snap-fit vents comprised of ePTFE membrane with a polyester non-woven backing material integrated into a PBT housing for rugged environments | Black snap-fit vents comprised of ePTFE membrane with a polyester non-woven backing material integrated into a PBT housing for rugged environments | Black snap-fit vents comprised of ePTFE membrane with a polyester non-woven backing material integrated into a PBT housing for rugged environments |
| Housing Material | PBT GF30 (hydrostabilized) | PBT GF30 (hydrostabilized) | PBT GF30 (hydrostabilized) |
| O-ring material | EPDM 50° Shore A | Silicone 50° Shore A | Silicone 50° μIRHD |
| O-ring color | Black | Red | Red |
| Outside diameter | 17.00 mm | 17.00 mm | 14.3 mm |
| Operating temperature | Tmax = +125 °C (140 °C for max 168 hrs) (depending on configuration) |
Tmax = +150 °C (depending on configuration) |
Tmax = +140 °C |
| Water entry pressure | > 60 kPa / 30 seconds | > 60 kPa / 30 seconds | > 80 kPa / 30 seconds |
| Typical airflow | ∼ 28 l / h / part at 7 kPa ≙ ∼ 81 cm3 / min at 1.22 kPa |
∼ 28 l / h / part at 7 kPa ≙ ∼ 81 cm3 / min at 1.22 kPa |
∼ 28 l / h / part at 7 kPa ≙ ∼ 81 cm3 / min at 1.22 kPa (Minimum Airflow: > 15 l/h at 7 kPa Maximum Airflow: < 45 l/h at 7 kPa or = < 129 cm3/min at 1.22 kPa) |
| Ingress protection class |
|
|
|
| Membrane characteristics | Hydrophobic and Oleophobic | Hydrophobic and Oleophobic | Hydrophobic and Oleophobic |
| Enclosure size | Medium to Large | Medium to Large | Small to Large |
| Electronics Housing Material | All typical metal and plastic housing materials | All typical metal and plastic housing materials | All typical metal and plastic housing materials |
| Installation direction | From outside of housing | From outside of housing | From outside of housing |
| Laser marking for increased traceability | Yes | Yes | Yes |
Please view our current Data Sheet for more detailed product information.
Quality
- What "Quality" Means, To Us and For You
- PPAP: An Overview
- Initiate a PPAP submission, waiver, or engineering / product fitness consultation
Resources
Aktuellste News
Event
Gore zeigt zuverlässigen Schutz für Fahrzeugbeleuchtung auf der DVN-Konferenz 2018 in München
30. Januar 2018 - 31. Januar 2018
Im Rahmen des 16th Driving Vision News (DVN) Workshops am 30. und 31. Januar in München, wird W. L. Gore Associates Lösungen für den zuverlässigen Schutz von Automobilkomponenten unter rauen Umgebungsbedingungen vorstellen.
Pressemitteilung
W. L. Gore & Associates im Finale der PACE Awards 2020 von Automotive News
Veröffentlicht: 21. Oktober 2019
Branchenweit einzigartiges Kondensationsmanagementsystem trocknet Scheinwerfer erstmals aktiv
Pressemitteilung
Aktives Entfeuchtungssystem von AML Systems und W. L. Gore & Associates sagt beschlagenen Scheinwerfern den Kampf an
Veröffentlicht: 9. Oktober 2018
Eine neue Technologie von AML Systems (AML) und W. L. Gore & Associates (Gore) beugt Kondensation aktiv vor und bietet beispiellosen Schutz für Scheinwerfer. Das neue elektrische Kondensationsmanagementsystem (CMD für Condensation Management Device) von AML basiert auf GORE™ Condensation Management Products und entfeuchtet Fahrzeugscheinwerfer aktiv und zuverlässig mittels regenerierbarer Trockenmittel. Die Neuheit wird heute auf der Fachkonferenz SIA VISION 2018 in Paris vorgestellt.
Event
Gore zeigt zuverlässigen Schutz für Fahrzeugbeleuchtung auf der SIA VISION 2018 in Paris
9. Oktober 2018 - 10. Oktober 2018
Im Rahmen der SIA VISION am 9. und 10. Oktober in Paris, wird W. L. Gore & Associates Lösungen für den zuverlässigen Schutz von Automobilkomponenten unter rauen Umgebungsbedingungen vorstellen. Der Schwerpunkt liegt dabei auf Produkten für Scheinwerfer und Elektronik / Fahrerassistenzsystemen.
FOR INDUSTRIAL USE ONLY
Not for use in food, drug, cosmetic or medical device manufacturing, processing, or packaging operations.